top of page
Search
davidhogg788

Candy Cart Signs

Updated: May 23, 2021

We had to produce a number of these double sided signs for a local sign firm , the signs are fitted to a candy display which is placed into a number of shopping centers around the country.


THE SIGN

The sign has a double face with a 70mm built up return , the sign is located onto a 3” oval stainless steel pole which is then fixed to the sweet display.


HOW TO MAKE THIS

First of all we machined a front and a back face for the sign on one of our cnc routers the faces are machined in 6mm clear acrylic , we machined in a small recess around the inside of the both faces to help locate the signs build up , once the faces are cnc machined and the edges polished we then proceed to adding the graphics , as the graphics are on the inside of the panels so it cannot be vandalized we need to print them in reverse on clear vinyl so they stick to the acrylic once applied the print is back up in white vinyl.


First of all we machined a front and a back face for the sign on one of our cnc routers the faces are machined in 6mm clear acrylic , we machined in a small recess around the inside of the both faces to help locate the signs build up , once the faces are cnc machined and the edges polished we then proceed to adding the graphics , as the graphics are on the inside of the panels so it cannot be vandalized we need to print them in reverse on clear vinyl so they stick to the acrylic once applied the print is back up in white vinyl.

26 views0 comments

Comments


bottom of page